|
 Okidata
ML 393+ 
Features and Specs
TECHNOLOGY, SPEED, AND PRINT CHARACTERISTICS
Print Method: 24-pin, (.20mm diameter),
Impact Dot Matrix
Print Direction: Bidirectional, short-line seeking
Graphics Resolution: 60 x 60 dpi (min.)
360 x 360 dpi (max.)
Print Speed/
Character Matrix: Speed Horiz. x Vert. @ cpi
Letter Quality 140 CPS 30x18 @ 12 cpi
Near Letter Quality 210 CPS 15x18 @ 12 cpi
Utility 415 CPS 9x17 @ 12 cpi
High Speed Draft 520 CPS 7x17 @ 15 cpi
Characters Per Line: CPI Max Char./Line
10 136
12 163
15 204
17.1 233
20 272
PS --
Vertical Line Spacing:
Fixed 6 LPI, 8 LPI
Variable n/60", n/72", n/180", n/216", n/360"
Feed Rate: 8 ips
Character Sets: Standard ASCII
Epson Character I, II
IBM I, II, and All Characters
16 Foreign Language Sets
Zero/Slashed Zero
DLL - 2 sets of 128 characters
French Canadian code page support
EMULATION, INTERFACE, MEMORY AND FRONT PANEL
Emulation: Epson LQ and IBM XL24, co-resident
Standard Interface: Parallel and 19.2K Super Speed Serial RS232-C
(Ready/Busy, X-ON/X-OFF)
Standard, co-resident
Memory: 23K for print buffer or 2 DLL character set
storage up to 40K with optional Buffer
Expansion card
Front Panel Switches: Select Paper Park/Top of Form
Quiet (Menu) Mode Font Selection
Line Feed Pitch Selection
Form Feed Print Quality Selection
Menu Mode: Print -- Prints Entire Menu
Group -- Selects Group Function
Item --- Selects Item
Set ---- Selects Item Value
Exit --- Exits Menu Mode, Enters Select
FONTS
Four resident letter quality fonts are selectable from the front
panel and available in all CPI settings:
Courier Helvette Roman Orator
Optional font cartridges available in Prestige and Letter Gothic.
PAPER HANDLING
Paper Input: ML 393 Plus
Cut Sheet 7.2" to 16" (18.3cm to 40.6cm)
Card Stock 5" x 14" (12.7cm to 35.6cm)
Continuous Form 3.5" to 15.5" (8.9cm to 41.9cm)
Envelopes Single Feed, 6.5" x 3.6" (16.5cm to 9.1cm)
to 9.5" x 4.1" (24.1cm to 10.4cm), Continuous
Form, non-overlap type
Number of Copies: Original plus 3
Single Sheet Thickness: 0.002" to 0.0049" (0.05mm to 0.12mm) maximum
Multipart Thickness: 0.014" (0.36mm) maximum
Paper Feeding: Bottom, Top or Rear
Built-in Push Tractor (Rear Feed)
Friction Feed (Top)
Optional Pull Tractor (Bottom/Rear Feed)
Optional Single and Dual Bin Cut Sheet Feeders
Single Part Paper Weight: 12 to 24 lb.
Card Stock Weight: 100 lb. or less
PRINT FEATURES
Four Resident Fonts Emphasized Enhanced
Italics Double Height Double Width
Triple Height Triple Width Underlining
Superscripts Subscripts Outline/Shadow
RELIABILITY, AND ENVIRONMENTAL
MTBF 4,000 hours (25% duty/35% page density)
MTTR 15 minutes
Printhead Life: 200,000,000 characters avg. in 10 cpi draft
mode at normal 25% duty, 35% page density
Size: 25.2" (w) X 19" (d) X 8" (h)
54.0cm(w) x 48.3cm(d) x 20.3cm(h)
Net Weight: 37 lbs. (16.8 kg) UPS Shippable
Electrical: 120 VAC +10%, -15%
220 VAC +10%, -15%
Frequency: 50/60 Hz +/- 2%
Power Consumption
(Operating): 180 VA
(Idle): 50 VA
Operating
Temperature: 41 to 104F DEG. @ 20 to 90% Rel. Humidity
(5 to 40C DEG.)
Storage
Temperature: -40 to 158F DEG. @ 5 to 95% Rel. Humidity
(-40 to 70C DEG.)
Altitude: 10000 feet (3,048 m)
Safety: UL: UL478 CSA: C22.2 (220)
FCC: Class B
Acoustic Noise: 58 dBA in LQ mode, 54 dBA in quiet mode
CONSUMABLES AND OPTIONS
Ribbon Cartridge:
Black 5,000,000 character nominal life in utility mode
Color 2.3 million black, 2.1 million red, 2.1 million blue, 1.3 million yellow character life
Black film 400,000 character life
Cut Sheet Feeders: Single Bin: CSF3001, Dual Bin CSF3002, 170
(16 lb.) or 100 (24 lb.) sheet capacity.
Paper width: 7.2" to 8.5". (18.3cm to 21.7cm).
Length: 10.1" to 14". (25.7cm to 35.6cm).
Pull Tractor Kit: Use with bottom feed for continuous forms, labels,
invoices, 3" to 16" (7.6cm to 15.2cm) wide media.
Includes acoustic cover.
Buffer Expansion Card: Increases memory from 23K to 40K for increased
buffer or IBM DLL character storage.
|
