|
 PRINTEK
New 4300’s Starting As Low As $2295
FormsPro 4000 Series Printers
300 - 530 cps forms printers
FP4300 Ser/Par 
FP4300 Twinax/Par
FP4300 Coax/Twinax
FP4300 ITX
FP4300 Etherlink
The FormsPro 4000 Series printers can solve your toughest printing problems
and automate most paper handling functions. With the FormsPro 4300, 4500, and 4503, you'll print with greater legibility and unsurpassed reliability.
- Tractor System. The FormsPro 4300 and 4500 have a single set of straight-up tractors. The FormsPro 4503 has the Tri-Trak System with
three sets of straight-through tractors.
- High-Speed for High-Volume Printing. With a draft speed up to 530 cps, FormsPro printers can print a typical 1,000 character document in less than five seconds.
That's over 700 documents per hour!
- Waste-Free Forms Tear-Off. After you tear off a form, the next is automatically positioned for printing.
- Superior Legibility-Even on 9-Part Forms. Auto-Gap feature adjusts the printhead according to form thickness.
- Trouble-Free Forms Handling. Easy-Load tilt-up top simplifies loading, and straight-up paper path eliminates the problem of forms buckling and jamming. Paper jam sensor permits
reliable, unattended operation.
- Automatic Page Edge Sensor. Optical sensor prevents printhead from printing beyond the edges of the loaded form.
- Stores Parameters for Up to 10 Forms. Spacing, margins, font and 11 other parameters are
set using four front panel buttons. Options are displayed on a 16-character LCD. Once you've set the parameters for a form, they can be stored and recalled at any time.
- Ruggedly Built for Reliable Operation.FormsPro printers are designed to withstand 100% duty cycles. The printhead carries a two-year limited warranty when used in combination with a
Printek brand ribbon - longer than any printhead in the industry. A one-year warranty is offered if a non-Printek brand ribbon is used
|
|
|
FormsPro 4000 Series
|
|
.
|
4500/4503
|
4300
|
|
Print Modes
|
|
Fast Draft
|
530 cps
|
300 cps
|
|
Draft
|
400 cps
|
225 cps
|
|
Fast Draft/High Impact
|
265 cps
|
150 cps
|
|
High Impact
|
200 cps
|
110 cps
|
|
Letter Quality
|
100 cps
|
55 cps
|
|
Optical Quality
|
65 cps
|
38 cps
|
|
Graphics
|
15,360 dps
|
8,640 dps
|
|
Printhead
|
18-wire parallel
|
9-wire parallel
|
|
Paper Slew Rate
|
12 ips
|
12 ips
|
|
Multi-part Forms
|
1 to 9 parts
|
1 to 9 parts
|
|
.
|
0.025" max. thickness
|
0.025" max. thickness
|
|
Audible Noise (Draft Mode)
|
62 dBA
|
62 dBA
|
|
Setup (Automatic Methods)
|
Printer-to-printer
|
Printer-to-printer
|
|
.
|
setup unit
|
setup unit
|
|
Operator Indicators
|
LEDs for power, Online and Fault
|
LEDs for power, Online and Fault
|
|
.
|
1x16 LCD for form selection
|
1x16 LCD for form selection
|
|
.
|
On/off line status and error descriptions
|
On/off line status and error descriptions
|
|
I/O Buffer
|
4K, expandable to 28K
|
4K, expandable to 28K
|
|
Standard Interfaces
|
.
|
.
|
|
Parallel
|
Centronics compatible
|
Centronics compatible
|
|
Serial
|
RS232, 300-19,200 baud
|
RS232, 300-19,200 baud
|
|
.
|
.
|
.
|
|
Software controls
|
|
Emulation Choice of
|
Printek, Epson, FX, IBM Proprinter, DEC LA 120, or Basic Bar Codes (Includes Code 39, 2 of 5, Interleaved 2 of 5).
|
Printek, Epson, FX, IBM Proprinter, DEC LA 120, or Basic Bar Codes (Includes Code 39, 2 of 5, Interleaved 2 of 5).
|
|
Physical Specifications
|
|
(H x W x D)
|
9.5" x 25" x 20.3"
|
9.5" x 25" x 20.3"
|
|
.
|
(24cm x 63.5cs x 51.5cm)
|
(24cm x 63.5cs x 51.5cm)
|
|
(Weight)
|
53 lbs. (24kg)
|
53 lbs. (24kg)
|
|
Continuous Mode
|
N/A
|
N/A
|
|
(8003 only)
|
.
|
.
|
|
Special Features
|
.
|
|
|
.
|
.
|
|
|
Specifications Common to All FormsPro and FormsMaster Printers.
|
|
Character Matrix
|
|
Fast Draft 9 x 9 cell
Draft 12 x 9 cell
Letter Quality 24 x 18 cell
Optical Quality 36 x 18 cell
|
|
Operator Controls
|
|
Normal Operating Mode: Online, Form Feed/Load, Forms Select/Unload, and Vertical Print Adjust.
|
|
Character Sets
|
|
Fast Draft, Draft, and Letter quality for Epson and IBM Proprinter. Optical Quality for OCR-A and OCR-B.
|
|
Character Spacing
|
|
5, 6, 6.7, 7.5, 8.4, 8.6, 10, 12, 13.3, 15, 16.7, 17.1, and 20 cpi.
|
|
Line Length
|
|
13.6 inches (34.5 cm).
|
|
Line Spacing
|
|
6 and 8 lpi. Also software programmable.
|
|
Form Parameters
|
|
Non-volatile
memory for ten forms, each supporting settings for: tractor path, cpi, lpi, form length, left and right margins, top and bottom margins, unidirectional printing, slashed or non-slashed zero, language, font, high-impact on/off.
|
|
Ribbon
|
|
Cartridge-nylon fabric, mobius loop, 23 million characters.
|
|
|
Paper Width
|
|
2.5 to 15 inches (6.4 to 38.1 cm).
|
|
Paper Loading
|
|
Straight path, bottom loading.
|
|
Paper Handling
|
|
Tear Bar: Auto-Scroll allows zero tear-off distance.
Auto-Gap: Adjusts printhead to form thickness.Paper type: Fanfold, continuous forms, edge punched, 15 lb.
Min. weight for single-part paper.
Sensing: Paper motion, paper edge and paper out.
|
|
Power Requirements
|
|
Voltage: 120 VAC +/- 10%
Frequency: 60 Hz
Power consumption: 60W non-printing, 225W printing. Optional 240 VAC, 50 Hz power supply also available.
|
|
Graphics Density*
|
|
60 to 240 dpi horizontally x 72 dpi vertically
|
|
Reliability
|
|
MTBF:10,000 hours on electronics with no duty cycle limitations.
Printhead Life: 500 million draft equivalent characters.
Machine Life: 1 million pages.
|
|
*May be emulation dependent.
|
|
.
|
|
