|
Print Modes
Fast Draft:530 cps
Draft: 400 cps
Fast Draft/High Impact:250 cps
High Impact:200 cps
Letter Quality:100 cps
Optical Quality: 65 cps
Graphics: 5,000 dps
Character Matrix
Fast Draft: 9 x 9 cell
Draft: 12 x 9 cell
Letter Quality:24 x 18 cell
Optical Quality: 36 x 18 cell
Printhead
18 wire parallel array.
Printhead Adjustment
Automatic gap adjustment is standard.
Character Sets
Fast Draft, Draft and Letter Quality for Epson™ and IBM® Proprinter. Optical Quality for
OCR-A and OCR-B.
Character Spacing
5, 6, 6.7, 7.5, 8.4, 8.6, 10, 12, 13.3,
15, 16.7, 17.1 and 20 cpi.
Line Length
85 characters at 10 cpi. Also software
programmable.
Line Spacing
6 and 8 lpi.
Paper Handling
Zero Tear-Off distance; paper out/paper jam detection; fanfold, continuous forms, edge punched.
Continuous Mode
Automatically loads paper from another tractor if paper out condition occurs. Only available in model 852.
Operator Controls
Normal Operating Mode: Online, Form Feed/Load
and Form Select/Unload.
Form Parameters
Non-volatile memory for ten forms, each supporting settings for:
tractor path, cpi, lpi, form length, left and right margins, top and bottom margins, unidirectional printing, slashed or non-slashed zero, language, font, high-impact on/off, form name.
Ribbon
Cartridge:nylon fabric, mobious loop, approximately 15 million characters.
Operating Indicators
LED indicates Online/Fault/Setup; 2
x 16 LCD for form selection; on/off line status and error descriptions.
|
Power Requirements
Voltage:100 to 250 VAC ±10%
Frequency:50 to 60 Hz
Power Consumption: 18W non-printing, 60W printing.
Paper Slew Rate
6 ips rear feed; 12 ips bottom feed (model 852* only).
Paper Width
2.5 to 9.5 inches (6.4 to 24 cm).
Paper Loading
Model 850:Rear feed.
Model 852*:Rear feed and straight through bottom feed.
Multi-Part Forms
1 to 5 parts; 0.025" max. thickness.
Graphics Density
60 to 240 dpi horizontally x 72 dpi vertically.
Audible Noise (Draft Mode)
60 dBA.
Setup (Automatic Methods)
Control panel, pluggable cloning module or remote via Windows program.
I/O Buffer
32k.
Standard Interfaces
Parallel: Centronics compatible.
Serial:RS232, 300 to 9,600 baud.
Software Controls
Emulation choice of Printek, Epson FX¨, IBM Proprinter, DEC LA120/210, Genicom ANSI (includes 20 popular bar codes) or Basic Bar Codes (includes Code 39, 2
of 5, Interleaved 2 of 5).
Physical Specifications
H x W x D: 7⊃2; x 18.5⊃2; x 17⊃2;
(17.8 cm x 21.6 cm x 43.2 cm)
Optional second tractor on model 852 adds 6⊃2; (15.2
cm) to height.
Weight: 32 lbs. (16.9 kg)
Optional second tractor on model 852
adds 10 lbs. (5.3 kg) to the weight.
Reliability
MTBF:10,000 hours on electronics, with 50% duty cycle.
Printhead Life:500 million characters.
|
PRINTEK
