 Xerox 4215/MRP and 4219/MRP Mid Range Printers
Xerox 4215/MRP 
Xerox 4219/MRP
Speed
4215/MRP: up to 15 impressions per minute simplex
4219/MRP: up to 20 impressions per minute simplex
Monthly Print Volume
75,000 impressions per month (4215/MRP and 4220/MRP)
Resolution
300 x 300 dots per inch (text and graphics) with Resolution Enhancement and 400 x 400 or 800 x 400
in PostScript mode
Paper Handling
4219/MRP: three trays, total 1,500 sheet capacity
4215/MRP: two trays, total 750 sheet standard (1,000 sheets optional)
Trays are available for A4, letter, legal, 11 x 17, A3, A5, B4 paper sizes (optional)
Two standard output trays, total 750 sheets, on both the 4215/MRP and 4219/MRP
Throughput Materials
Standard, recycled and high fiber content papers
Transparencies, label stock, envelopes, card stock and other specialized application materials
Sizes from B4 to 11 x 17 in. (dependent on PDL)
Emulations and Operating Modes
Adobe PostScript Level 2 and HP PCL5 emulation
IBM IPDS and IBM SNA Character Stream (SCS)
IBM printer emulations: 3812 / 3816 in 5219 mode, 5219, 4234, 5224, 5225, 4245, 5256, and 6262
(twinax / SCS) and 3812/3816 emulating 3268, 3262, 4245, 3287, 4214 and 6262 (coax / SCS) and 3812, 3816 and 4028 (IPDS)
Fonts
IBM 3816 replicant fonts (for coax and twinax)
7 PCL bitmapped and eight scaleable resident fonts
35 PostScript scaleable fonts
System Disks and Memory
4 MB standard
4 MB, 8 MB, or 16 MB memory upgrades (optional)
1 or 2 MB programmable flash ROM for PostScript fonts / forms storage (optional)
60 MB hard drive for PostScript font storage and FAX spooling (optional)
System Controller / System Interfaces
RISC processor, instruction cache and interleaved memory
RS-232C serial, Centronics parallel standard
I-data twinax built-in interface (optional)
AppleTalk / LocalTalk (optional)
FAX Interface includes FAX modem for CCITT Group 3 (optional)
Multiple active ports with the ability to set priority to any port automatically
Customer Replaceable Unit (CRU)
All-in-one Toner Cartridge yields 14,000 prints at 5% area coverage
Environmental Requirements
Temperature: 50° to 99° F (10° C to 35° C)
Relative humidity: 15% to 85%
Noise: 53 dB operating
Electrical Requirements
115V, 60Hz, single phase: 220 / 240V, 50Hz
Agency certifications: UL, CSA, FCC Level A, VDE-B
Physical Characteristics
|
|
Width
|
Depth
|
Height
|
Weight
|
|
|
In.
|
mm
|
In.
|
mm
|
In.
|
mm
|
lbs.
|
kg
|
|
4215/MRP
|
20.4
|
51.8
|
17.1
|
43.4
|
16.0
|
40.6
|
65
|
29.5
|
|
4219/MRP
|
20.4
|
51.8
|
17.1
|
43.4
|
19.4
|
43.3
|
83
|
37.7
|
MICR Options
MICR printing is supported for 8.5 x 11 in. paper only, optimized for 24 lb., short grain security paper
Resolution Enhancement and PostScript mode not supported for MICR applications
E-13B portrait MICR fonts (available on floppy, 1600 bpi tape and tape cartridge)
All-in-one MICR Toner Cartridge, yields 14,000 prints at 14% area coverage
MICR performance optimized for temperature range 60( to 80( F, relative humidity 15% to 85%
MICR Security Module (optional)
|
