 Xerox 4450/MRP MID Range Printer
Speed
Up to 50 pages per minute simplex
Monthly Print Volume
125,000 to 900,000
Resolution and Printer Characteristics
Xerographic engine, 300 x 300 dots per inch
Character size: 4 to 24 point standard; up to 72 point or larger under special custom font orders
Character set
-Multiple character sets per page, including OCR and bar codes
-Up to 128 fonts per page from extensive font library
Prints two-sides (duplex) under 4450/MRP software control
Up to 8.5 x 13.7 in. (218.4 x 348 mm) image area
Paper Handling
Up to four input feeders
-Main Tray: 1,000-sheet capacity at 20 lb. (80 gsm)
-Tray 2: 500-sheet capacity at 20 lb. (80 gsm)
-High-Capacity Feeder (optional)
-Two additional 1,000-sheet input feeders (optional)
Output options
-Dual stacker: 750 sheets each at 20 lb. (80 gsm) with offsetting capability or
-Stitcher/Stacker: 2,000 sheet capacity of 20 lb. (80 gsm) stock with set stitching (up to 50 sheets per set) and offsetting capability. Job deflection may vary up to 0.62 in. (15 mm)
Throughput Materials
20 to 110 lb. (80 to 200 gsm) cut-sheet paper weights
Transparencies, label stock, other specialized application materials
8 x 10 in. to 8.5 x 14 in. (203 x 254 mm to 216 x 356 mm including A4) paper sizes
Emulations and Operating Modes
Supported Data Types
-ASCII, Metacode, Image, Line Conditioned Data Streams (LCDS), SCS, DCA/FFT
IBM Printer Emulations
-3812 in 5219 mode
-3816 in 5219 mode (twinax only)
-4245, models T12 and T20 (twinax only)
-5219, models D01, and D02
-5224, models 1 and 2
-5225, models 1, 2, 3 and 4 (twinax only)
-5256, models 1, 2 and 3
-5262, model 1 (twinax only)
-6262, models T12 and T14 (twinax only)
Fonts and Forms
Xerox Standard Font Library A03 or R03
Commonly used AS/400 line printer and 3816 resident fonts
Forms created and stored electronically, changeable on a page-to-page basis and merged with variable data as printed
System Disks and Memory
5 MHz system disk
-50 MB x 2, standard configuration
-expandable to 200 MB in 50 MB increments
512K words of control memory
8 MB of font memory, expandable to 16 MB (optional)
8 MB of graphics memory (optional)
System Interfaces
AS/400 twinax connection or AS/400 Token Ring connection using "PC Support/400"
Environmental Requirements
Recommended operating temp.: 72° ( 4°F ± 22° ± 2° C)
Min./max. operating temp.: 60° to 80° F (15.5° to 29.5° C)
Relative humidity: 45 ± 10%
Noise: meets the 70 dB(A) noise exposure limit
Heat dissipation: 7,600 Btu per hour standby; 14,900 Btu per hour operating
Cables: Printer Module and Control Module can be separated by up to 50 ft. (15.2 m); keyboard /
display has 15 ft. (4.5 m) power cable and 25 ft. (7.6 m) data cable
Electrical Requirements
Control Module: 120/208 or 120/240 VAC, 60 Hz, 30 amp service, NEMA L14-30R; 200/240 VAC ±
10%, 50 Hz
Printer Module: 120/208 or 120/240 VAC, 60 Hz, 30 amp service, NEMA 14-30R; 200/240 VAC ( 10%, 60 Hz 3 phase STAR-connection, 380 VAC ± 10%, 50 Hz
Agency certifications: UL, CSA, IEC 950; VDE 0871 (Level A) and 0875; EEL 82/499; and CISPR-22
KVA rating: Control Module 1.8 standby, 1.8 operating; Printer Module 0.875 standby, 3.1 operating
Physical Characteristics
|
|
Width
|
Depth
|
Height
|
Weight
|
|
|
In.
|
mm.
|
In.
|
mm.
|
In.
|
mm.
|
lbs.
|
kg.
|
|
System Control Module
|
48
|
1,219
|
28.5
|
724
|
41
|
1,040
|
430
|
195
|
|
Printer Module
|
59
|
1,499
|
34.5
|
876
|
41
|
1,040
|
1,046
|
475
|
|
High-Capacity Feeder (opcional)
|
22.5
|
572
|
29
|
737
|
38
|
965
|
288
|
131
|
|
Dual Stacker (optional)
|
35
|
889
|
28.5
|
724
|
38
|
965
|
226
|
103
|
|
High Capacity Stitcher/Stacker (optional)
|
33
|
838
|
28.5
|
724
|
38
|
965
|
228
|
104
|
|
