 Xerox 4700 II Color Document Printer
Speed
Up to 7.5 pages per minute for color, and up to 30 pages per
minute for black (for 8.5 x 11 in. or A4)
Monthly Print Volume
Up to 80,000 pages per month (Based on: 50,000 black-only pages, 30,000 color pages)
Resolution and Printer Characteristics
300 x 300 dots per inch enhanced with patented Xerox Quad Dot technology
Xerographic engine, with black, magenta, cyan and yellow developer subsystem
Four-pass recirculating paper path, with 0.005 in. (0.127 mm) plate-to-plate registration
PANTONE® licensed color palettes
Paper Handling
Up to three input feeders, 2,420 sheets total
- Tray 1: up to 500 sheets of 20 lb. (75 gsm) stock
- Tray 2: up to 170 sheets of 20 lb. (75 gsm) stock
- High-Capacity Feeder: up to 1,750 sheets of 20 lb. (75 gsm) stock (optional)
High-Capacity Stacker, up to 2,000 sheets of 8.5 x 11 in. or A4 stock, with job offsetting, 1,800 sheets of 11 x 17 in. or A3
Forms Consideration
Forms created and stored electronically
Changeable on a page-to-page basis
Merged with variable data as printed
Paper Sizes
Tray 1: 8.5 x 11 in. (letter) or A4
Tray 2: 8.5 x 11 in. (letter), 8.5 x 14 in. (legal) or 11 x 17 in. (A4 or A3)
High-Capacity Feeder (HCF): 8.5 x 11 in. (letter) or A4
Large paper, High-Capacity Feeder extension kit (LPHCF): 8.5 x 11 in., 8.5 x 14 in., 11 x 17 in., A4, A3. (This option orderable from Customized Applications Service: (716) 427-5414.)
Paper Weights
20 lb. to 32 lb. (75 to 120 gsm) plain paper and 90 lb. index (163 gsm) in all input feeders
Transparencies, AB Transfer Paper Docupak (requires LPHCF)
Emulations and Operating Modes
Automatic emulation switching between PostScript and HP-PCL5
Adobe PostScript, Level 2
Hewlett-Packard LaserJet III (PCL5)
Hewlett-Packard Graphics Language (HP-GL)
Xerox Distributed Print Mode (XDPM) operating system software with the Xerox Escape Sequence (XES) command set, with color extensions
Fonts and Forms
35 PostScript-compatible contour fonts included with Xscript emulation
Adobe Type 1 fonts can be downloaded and stored on the printer
HP equivalent raster/contour fonts included for HPJL III emulation
HP-GL stroke fonts included with HP-GL emulation
Xerox fonts for XES emulation
A wide range of additional fonts and custom fonts available from Xerox Font Services
Font saving when switching emulations
Electronic forms can be created and stored in XES format
System Disks and Memory
243 MB formatted hard disk for storage of software, fonts, forms and job spooling
209 MB formatted imaged disk for electronic collation and rated speed printing of second and
subsequent document copies. The image disk has capacity for 49 color pages or 194 black-and-white pages or a combination
3.5 in. floppy drive for loading additional software, fonts or saving system parameters and job accounting data
32 MB DRAM
System Interfaces
RS-232C serial
Centronics parallel
DataProducts parallel (optional)
Remote communications for IBM SNA/SDLC protocol (optional)
Network Compatibility
Ethernet, Tokenring, LocalTalk, PhoneNet, TCP/IP, Novell NetWare, EtherTalk, AppleTalk, DEC
Pathworks/Ethernet
Environmental Requirements
Temperature range: 50° to 90°F (10° + 32°C)
Relative humidity range: 15% to 85%
Audible noise level: meets the 70 dB(A) noise exposure limit
Electrical Requirements
120V, 60 Hz, single phase, 2.2 KVA, 20 amp dedicated (domestic); 220/230V, 50 Hz, single phase,
2.2 KVA (international)
Agency Certification: UL, CSA, IEC 950, VDE 0871 (Level A), EEC 82/499
Physical Characteristics
|
|
Width
|
Depth
|
Height
|
Weight
|
|
|
In.
|
mm.
|
In.
|
mm.
|
In.
|
mm.
|
lbs.
|
kg.
|
|
Standard Configuration with User interface and High-Capacity Stacker
|
70
|
1,750
|
36
|
900
|
55
|
1,375
|
900
|
408
|
|
LPHCF extension (increased width clearance)
|
79
|
1,975
|
|
|
|
|
|
|
|
